Welcome to the AngelSense Support Center

Turning on / restarting the device

Note: GPS 1 (AT&T or T-Mobile device) guidance is available here

Turn the device on by pressing the power button until it vibrates. This may take about 10 seconds or longer. Please note that the device does not automatically power on when it is plugged in. If the device ran out of battery, it will need to be manually powered back on. 

Turning on the device is best done while it is still connected to the charger, as it may not have enough power to turn on when the battery is completely depleted.

A couple of minutes after starting the device the "Device is charging" message should sound.

The GPS 2 device has the option to do a restart or to shut down the device remotely, from your app as well. Powering the device back on would need to be from the actual device itself. See: Restart or Shutdown GPS 2 Device Remotely

Note: The power button is marked on the sleeve so that you can keep the device in the sleeve. (If you are looking at the device in the silicone casing with the "A" facing you, the power button is on the right upper side.) 

Note: If the device is already on it will restart, to prevent your child from turning it off. Pressing the power button will not turn off the device, only restart it. 
 

Related Articles:

How can I tell if the device is on?
Charging the device