Welcome to the AngelSense Support Center

Why is my Listen-In or AngelCall not going through?

Listen-In is essentially a one-way phone call to the AngelSense GPS device. AngelCall is a two-way call to the AngelSense GPS device, available on the GPS 2 device and COMING SOON TO GPS 1!

To Listen-In or speak to your child: 

  1. The device has to be in an area with good cellular coverage
  2. You must have authorization (set by the Primary Guardian from the Guardians menu)
  3. You must call from the number associated with your Guardian

If your call does not come through, check the following:

  • Cellular coverage: If the app status bar shows "No Communication" or poor cellular reception (a single bar) it is likely that cell reception is insufficient for the call to go through. You can check cellular reception by entering Runner Mode and validate the app is updating via the status bar. Try calling the device again until it answers, as you would with a regular phone call that did not go through. If the device appears to answer, but is silent then the call most likely does not have sufficient cellular reception as well. You can try calling the device when it has adequate cellular reception and definitely has background noise to verify.

  • Phone number: Go to your settings, from the main Menu, and validate that your phone number is the number of the phone you are using

  • Authorization: Ask the Primary Guardian (the one who purchased the service) to grant you authorization via the guardians menu. By default, the first two guardians are authorized.

  • Blocked Caller ID: In order for an authorized number to be recognized and allowed to call, the number cannot be blocked. You can try calling another phone and see if your number shows up as blocked. To unblock your caller ID, please contact your phone carrier. (You can try calling your device directly, instead of using the app, and putting *82 in front of the device's phone number. If you are able to call using *82 then your phone number's caller ID is blocked.)

  • Third Party Provider: Some phones bind your phone number to a third party provider, such as Google Voice. You can try calling another phone and see what the number shows as. If it is a relay number, such as this that shows up on caller ID, it may be different every time. You would need to contact your phone carrier for this issue.

Note: sometimes you may get a message saying your voicemail is not setup or the caller is not available. The reasons above apply to this case as well.

 

 

NOTE: For the GPS 1 device, we are gradually updating the devices. In order to see these features in your app, please verify that you are using app version 1.1.3 and that your device has software version G3.EY.056. This is currently only available on the web app and Android apps. It will soon also be available on iOS apps

Related Articles: